In the COM Properties dialog, click Restore Defaults to set the correct baud rate, data bits, stop bit, and flow control. 11. Click OK. 12. At the blinking screen, press Enter. You should be prompted enter the password (default is admin). Note:If the Password prompt does not appear, press Enteragain.

The password on there i believe cannot be changed, so will still be the default of “admin” from there, you can use option 3 to set login password to default, as well as re-set the network settings if you don’t have those either. once done you should be all good to log in to the web portal and change the password 🙂

Are you Sure? Cancel Sign out . Are you Sure?

70 Option 3: Set Login Password to Default. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Network Management Card acquires information regarding the operation status of the UPS systems and provides remote control of the system through the ETHERNET network from any SNMP administration station or Web browser. www.eaton.com Network Management Card (Network-MS) User Manual Network Management Card-User Manual 34003991XT_EN/EGPage 11/142

Default settings parameters and limitations 2.4.2 Date & Time The current date and time appears in the footer at the bottom of the screen. For details on default parameters and limitations, see the Information>>>Default settings parameters section. Settings Contextual Help – 28 You can set the time either manually or automatically.

UPS is badged HPE R1500 G4 NA ; but is really an Eaton R1500. It works fine; and the HPE software default login is admin-admin. I bought a used $25 Network Management Card for the UPS and is badged Lenovo; but is an Eaton Network Management Card – MS (the older one).

The default user name is admin. STEP 5 – Enter the password in the Password field. The default password is admin. STEP 6 – The password must be changed at first login. STEP 7 – Click Login. The Network Module web interface appears. 2.3.2 Finding and setting the IP address 2.3.2.1 Your network is equipped with a BOOTP/DHCP server (default)

Viewing Network Settings. Username : apcinfo. P